VAF Viscotherm ® V-92
Series V92 Model VC Electronic Component System
Viscosity control of fuel oil for combustion engines is a necessity because of unpredictable quality of fuel.
Prevention of engine damage and reduction of maintenance, next to efficiency
improvement, are essential to the financial bottom line.
Your advantage using Viscotherm V92
Designed to save time and raw material
in-line measurement of viscosity will give you
the possibility to optimise your process and
instantly obtain the required quality of final
product. No samples have to be taken and
bulky mixing vessels are no longer necessary.
- Viscosity control of intermediate and heavy fuel oils used for main and auxiliary diesel engines on board ships.
- Viscosity control in oil-fired power plants
and other industrial applications using
heavy or intermediate fuel oils.
|Viscosity range:||0-25 mPa s and 0-50 mPa s are standard. See 'Ordering Information' for other ranges.|
|Flange connections :||DN 50 (2”), DIN PN 40 bar is standard. DIN PN 100, ANSI and JIS flanges at extra cost. See 'Ordering Information'|
|Body :||Steel ASTM A2 1 6.WCB|
|Capillary assembly :||Steel and stainless steel; stn.stl/glass from range 0-200 mPa.s|
|Gear pump :||Stainless steel|
|Temperature :||Fuel oil max. 200°C (392°F); ambient max. 60°C (140°F)|
|Fuel flow rate :||Max. 35 cu.m/h|
|Response time :||Approx. 1 minute|
|Accuracy :||Better than +/- 2%, provided that mains power frequency is a constant 50 or 60 Hz|
|Supplyvoltage :||See 'Ordering Information|
|Insulation class :||VDE 0530, Class F. Tropical insulation acc. Lloyds Register of Shipping.|
|Protection class :||IP55; ex-proof motors IP44|
|Power consumption :|| 50 VA (AC motors, not ex-proof); 90 VA 1220/380 VAC, 3 ph, ex-proof and
DC motors); 120 VA 11 10/190 VAC, 3 ph, ex-proof motors)
|Weight sensor/DPT ass'y :||32 kilos|